5.1 system Mission m3 Series

Budget classification Mission series m3 consists of ten components that in order to organize a multi-channel complex can be combined in different ways with each other. In our case, the front and rear pairs used the same "Satellites" m32 - quite "adult" bookshelf speakers, built in classical style Mission. Two bands, "inverse" placement on the front panel speakers (tweeter - below), excellent quality acoustic design of 18 mm MDF, neat anti-diffraction circle... Proven drivers - inch tweeter dome synthetic membrane Viotex and 165-mm woofer/midrange-head DiaDrive with precision magnetic system and hemispherical cellulose cone - closed original repeating shape faceplate protective and decorative mask. m32 connection even allows separate bands (bi-wiring). However, incorporation into their cable of more than 1.5 m. mm is problematic, but it is attributed to the shortcomings circumstance - hand is not raised. M3c2 center built on the heads of smaller sizes (140 mm) in a symmetrical pattern d'Appolito. Included - foam plugs for the rear vented ports, whom the center - as much for two. There are polymeric self-adhesive feet. When vosmiomnom, according to his passport, an input resistance of at least impedance module satellites drop to 1.6 ohms (20 Hz), which could theoretically trigger operation of the protection of low-power receiver during excessive burden bass speakers. Subwoofer m3as - "in the body". On a massive half-meter depth housing, fashioned from 29 - and 18-mm plates MDF, shows no sign of Emitters: reflex port and a large speaker - at the bottom, elevated above the floor to a height of large conical bearings and bushings under complete spikes. Useful 40 liters body volume is filled with a special "long fiber" mineral wool. Subwoofer has only input terminals (high-amplitude, one linear, LFE); have a phase inverter. Dynamics of the magnetic field is screened.

Sound. Set Mission distinguished soft, very comfortable and well designed in detail sound. Small timbre mismatch front and center can be detected only at very closer listening. Desire to do this because of the obvious advantages m3 sound image does not arise - movie miss! Necessary and sufficient "volume" and the quality of the bass achieved us at "zero" receiver settings and the average level of the subwoofer. Can be louder, but the low-frequency content "looks" is not so attractive to the delicate fragments, although episodes that tell of large-scale disasters, some excess heaviness is often very useful. To increase the volume completely loyal satellites; exceptional ability to work with macroform demonstrated center. Of course, m32 can be used as an independent stereo pairs capable of correctly play any music. In the multichannel version should take responsibility for setting up the subwoofer.