|
DVD-player TEAC DV-3500Mirror inset on the front panel for devices TEAC company is very unusual, but other manufacturers use such a design solution quite often. Set of buttons on the front of the DVD player TEAC DV-3500 - the minimum, however, better not to use them at all, so as not to contaminate the box. In the algorithm the initial setup there are some subtleties. For example, S-Video signal is disabled by default, although it has a special output (activated through the Setup menu); analog output can be submitted one of two modes DOWMIX: stereo or multichannel signal matrixing (for recording to a VCR need to use it - it contains a "rear" information for the decoder Dolby Pro Logic). It is noteworthy that DTS-channel analog soundtracks signal is not translated. The dynamic range (eight values) allows to accurately select the desired dynamics. Interestingly organized program playback. You can program up to 99 tracks, but the total time sequence must not exceed 100 minutes. In addition, during playback, you can mark marker to five scenes, and then instantly return to them. Resuming playback from the stop not only possible after stopping, but after the transition mode Standby. When playing a CD and MP3 menu screen disappears after 5 min. If you leave the DV-3500 on, then 10 minutes after the end of play, the player enters standby mode. Remote control with large buttons navigate the menu and ample opportunities direct call special functions very comfortable. The only small drawback - a must if you select a track, search or click the button to confirm the setting SELECT. But to do it almost always falls, so you get used quickly, and protection against accidental operation - one hundred percent. Deservedly machine TEAC DV-3500 rate, primarily VCR owner - player has complete bi-directional transcoder NTSC-PAL.
- Technical comment - Slight imbalance channels (0.1 dB) remains almost the entire frequency range. At a frequency of 3 kHz frequency response begins a slight rise (0.4 dB at 20 kHz), but a significant change in timbre, he does not. Signal/noise ratio for all sources - at the level of 98 dB. Intermodulation spectrum clean enough, digital filtering is implemented well. Amplitude characteristic TEAC DV- 3500 has excellent linearity (up to -70 dB), but the output signal is inverted, so the machine is better to connect to " figure". Color definition video path - high color rendering faithful. S-Video signal gives a richer and RGB - less noisy image. |